The installation and maintenance of the chain plate wire is an important link to ensure the normal operation of the equipment and extend the service life. The following are the precautions for the installation and maintenance of the chain plate wire, and the methods to ensure the safety of the operation are given.

Chain plate wire installation precautions:

1. Before equipment installation, a detailed construction plan should be formulated on the construction site, including the process flow, equipment layout, installation sequence, etc., to ensure the orderly progress of the entire installation process and reduce the possibility of problems.

2. Before installation, it is necessary to check the integrity and quality of each component of the chain plate line, such as the chain plate, axle, bearing, etc., to ensure that it meets the requirements of use.

3. Pay special attention to the tension of the chain when installing, too tight will increase the wear of the chain and the load of the chain wheel, too loose will lead to unstable operation.

4. The selection of the drive motor of the chain plate line should be based on the actual needs and process requirements, and the motor power and speed should be reasonably configured.

5. All installation work must be carried out in accordance with the relevant installation drawings, operating rules and technical requirements, and illegal construction is strictly prohibited.

Chain plate line maintenance precautions:

1. Regularly inspect the chain plate line, check the wear of the chain, sprocket, bearing and other parts, and replace the problem in time.

2. Lubricate the chain plate line regularly to maintain good lubrication of the chain and sprocket to reduce friction and wear.

3. Clean up foreign bodies and deposits on the chain plate line, especially for materials with high viscosity, and clean them regularly to prevent blockage and abnormal operation.

4. Pay attention to the alignment of the transmission part of the chain plate line, keep the chain and sprocket in the correct position, and avoid chain skipping and chain damage.

5. The tightness of the chain should be adjusted regularly to ensure the appropriate tension of the chain and avoid the failure caused by too tight or too loose.

6. Maintenance personnel should regularly check the electrical part of the chain plate wire to ensure the normal operation of the electrical control system and prevent accidents caused by electrical faults.

Operation safety guarantee method:

1. Maintenance personnel must be familiar with the working principle, structure and relevant operating procedures of the chain plate line, receive professional training and hold the corresponding operating certificate.

2. All personnel must wear personal protective equipment to protect the head, hands, feet and body to avoid accidental injury.

3. When operating the chain plate line, you should stay focused and not perform other actions unrelated to the operation, such as smoking, playing, etc., so as to avoid distraction and accidents.

4. Abide by the operating rules, it is strictly prohibited to operate the equipment without authorization, prevent illegal operation behaviors, and ensure the safety of the operation process.

5. If the chain plate line is found to be abnormal, such as abnormal sound, vibration, etc., it should be stopped immediately for inspection, and should not be forced to continue operation to avoid aggravating the fault.

6. In case of emergency or equipment failure, it shall report to the maintenance personnel or relevant responsible persons in time, and cooperate in handling the work.

To sum up, the installation and maintenance of the chain plate line should be carried out in strict accordance with the requirements of the operating procedures, especially to comply with the relevant safety operation specifications, and strengthen the inspection and maintenance work to maintain the normal working state of the equipment to ensure the operation safety and improve the service life of the equipment.